top of page



The Process

Applying 100% Silicone Roof Coating

  1. Clean roof surface with a power washer, preparing it to receive coating. Use a minimum of 2,000 psi of water pressure. Making sure all loose dirt and debris is removed.

  2. Once roof is dry, make any necessary repairs to drains, seams, flashings, and fasteners to get them in good working condition.

  3. Perform adhesion tests and, if necessary, apply a primer to your roof to improve coating adhesion.

  4. After making repairs, apply coating at the proper rate for your roof type. Use a medium nap roller to spread the coating out as evenly as possible.

  5. Clean all tools and equipment with mineral spirits.

  6. White Silicone is best for UV & heat factors. Nine colors available

bottom of page